采样率: 数值 2次/秒
Designed as a small, easy-to-carry device that can be put in your pocket !
The full-auto range has been adopted to eliminate the need of selecting a range !
Slim jaws with width of approximay 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires.
■ Back light has been adopted to use in the dark place.
■ A leverbuttons are laid out in positions where they can be handled with a single hand.
■ The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurementto check the measured value later.
■ The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter.
■ Its rear has been curved so that the clamp meter can be held comfortably in the palm.